Image thumbnail 0
Image thumbnail 1
Image thumbnail 2
Image thumbnail 3
Image thumbnail 4
Image thumbnail 5
Image thumbnail 6
Email

Klein ET920 USB-A/USB-C Digital Meter (Type A & C)

Manufacturer: Klein Tools | Catalog # ET920 | OneSource Part # 4908014
$29.99/ea
ea
Adding...
Log in or register to view your price, purchase history, and more!
Usually ships within 6 to 8 days
Specification Sheet

Technical Information

Applications
USB Port Voltage, Current, Capacity, Energy and Resistance (Calculated)
Current
0.05-5 Amp
Display Type
LCD
Material
Polymer
Resistance
400 ohms Maximum
Type
USB-A (Type A) and USB-C (Type C)
Voltage
20 Volt

Manufacturer Information

Family Brand Name
Klein Tools

General Product Info

GTiN
00092644691669
Product UPC
09264469166
Weight
1.70 oz

Dimensions

Depth
9.04 Inch
Height
0.53 Inch
Length
2.96 Inch
Overall Length
2.96 in
Width
1.950 in

Certifications and Compliance

CA Prop65 Warning
WARNING: Cancer and Reproductive Harm See www.P65Warnings.ca.gov for more information.
  • 3 to 20V DC; Current: 0.05 to 3A (USB-A); 3 to 20V DC; Current: 0.05 to 5A (USB-C)
  • No batteries needed; powered by the USB port being tested
  • Voltage and current overload detection
  • Built to withstand a 6.6-Foot (2m) drop
  • Rugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demands
  • Hi-resolution LCD for clear visibility in environments with low ambient lighting
  • Tests most common standard USB-A or USB-C ports, including Qualcomm Quick Charge® ports
  • Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated)
  • Durable cables to allow easy access to hard-to-reach ports
  • Store and recall up to 10 readings
Warnings
  • This meter will NOT display current below 50 milliamperes, even if it is allowing this to pass through. NOTE: The display will show zero current.
  • Do NOT use during electrical storms or in wet weather. Do NOT use if meter appears damaged. Use caution when working with voltages above 25V RMS or 24V DC. Such voltages pose a shock hazard.
  • To ensure safe operation and service of this meter, follow all instructions. Failure to observe warnings can result in severe injury or death.
  • Do NOT use with ports that operate outside of the rated voltage and current. NEVER use on a circuit with voltage or current that exceeds the maximums specified for this device.